Charles Eames Leg Splint

Charles Eames for Evans Products Rare Set of Six Dept of the Navy Issue unopened molded plywood leg splints.

A wrapped example of the iconic Eames splint produced by Evans Products for the US Navy in 1942. This is a great collector's piece to own and features completely intact wrapping.

Set of six Charles Eames' leg splints manufactured by Evans Products Co., Molded Plywood Div., Venice, CA. in their original wrappings.

Mid century WWII leg splint created by Charles and Ray Eames for Evans Products Company, 1943.

All original Charles and Ray Eames leg splint circa mid-1940s.

Charles and Ray Eames leg splint, 1943 for Evans.

Charles Eames for the Plyformed Wood Co.( later Evans Products) 1943, plywood leg splint designed for the U.S.

Produced for the United States Navy by the Evans Products Company, Molded Plywood Division. Los Angeles California marked and stamped including the original wrapper

For your consideration is a wonderful, sculptural wood leg splint, by Charles and Ray Eames, circa the 1940s.

For your consideration is this rare Charles & Ray Eames sculptural leg splint, designed for the US Navy, this iconic sculpture was crafted using birch and molded plywood.

A molded plywood leg splint conceived during the war years with the process transferring to furniture design by the team of Ray and Charles Eames.

Created by Ray and Charles Eames between 1941 to 1942 for the U.S. Navy is the molded plywood leg splint, plywood was called Plyformed Wood during this time.

Rare American early mid century wooden "leg splint" in molded plywood by Charles & Ray Eames produced by Evans USA, 1940s.

Must have for the Eames addicts a leg splint in birch plywood. Produced and signed by Evans Products Company, Molded Plywood division. Very good original condition with original wrap...

Must have for the Eames addicts a leg splint in mahogany plywood. Produced and signed by Evans Products Company, Molded Plywood division. Very good original condition and in an uncom...

CHARLES EAMES LEG SPLINT EVANS PRODUCTS 1943. Charles Eames Leg Splint In Original Paper Wrapper Evans Products Company Eames Birch Plywood Leg Splint 1943 Charles Ray Eames Mid C...

Set of six Charles Eames' leg splints manufactured by Evans Products Co., Molded Plywood Div., Venice, CA. in their original wrappings.

Produced for the United States Navy by the Evans Products Company, Molded Plywood Division. Still in their original 1940's wrapping. Each splint is sold separately. Price is per ...

Produced for the United States Navy by the Evans Products Company, Molded Plywood Division. Still in their original 1940's wrapping. Each splint is sold separately. Price is per ...

Produced for the United States Navy by the Evans Products Company, Molded Plywood Division. Still in their original 1940's wrapping. Each splint is sold separately. Please use C...

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, Molded Plywood Division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, Molded Plywood Division.

Sculptural leg splint, designed by Charles and Ray Eames for Evans Products, American, circa 1940s.

The WWII molded plywood leg splint, designed by Charles Eames and manufactured by Evans Mfg., is a pioneering example of functional design and innovative use of materials.

The WWII molded plywood leg splint, designed by Charles Eames and manufactured by Evans Mfg., is a pioneering example of functional design and innovative use of materials.

Charles and Ray Eames (American, 1907/1912-1978/1988) for Evans Products, leg splint in molded plywood, with branded "S2-1790" interior and stamped manufacturer's mark to exterior 'S...

A Mid-Century Modern leg splint created by Charles and Ray Eames for Evans Products Company in the 1940s.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

The molded plywood leg splint, designed by Charles Eames and manufactured by Evans Products Company, Molded Plywood division, is a pioneering example of functional design and innovat...

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

Molded plywood leg splint designed by Charles and Ray Eames for Evans Products c. 1940s.

These leg splints were designed by Charles and Ray Eames and produced for the United States Navy by the Evans Products Company, molded plywood division.

Charles Eames 'Leg Splint,' circa 1942. Execution: Evans Products, USA.

Plywood leg splint designed by Charles Eames for U S Navy ; c. 1943; manufactured by Evans Co.

Plywood Leg Splint by Charles Eames, Manufactured by Evans Products Co., Molded Plywood Division, Venice, CA.

New old stock from WW2. This molded plywood leg splint was designed by Charles & Ray Eames.

Original design created during world war II for the U.S. navy. The MoMA collection counts with one of these pieces.

A molded plywood splint designed to replace the problematic metal splints used by the military during WWII. The Eameses experimented with their wood-molding process to try to satisfy...

Commissioned by the U.S. Navy, Charles and Ray Eames designed and produced this molded plywood leg splint in 1942 to be both light weight and sturdy.

The precursor to modern molded wood furniture design, this leg splint was commissioned from Charles and Ray Eames by the United States Navy in World War II.

c. 1979. We reupholstered and refoamed the loose cushion in a nubby brown/white boucle but kept the chair fabric original.

Classic Mid-Century fiberglass arm shell chair designed by Charles and Ray Eames, 2nd year production featuring early exposed fibers, heavy iron x base, large rubber shock monts, unu...

Ray and Charles Eames’ iconic folding screen, FSW-6, for Herman Miller takes the inspiration for its undulating shape from the folds of heavy drapery. Composed of articulated panels ...

This the the La Chaise chair designed by Charles and Ray Eames and produced by Vitra. The piece is made up of sculpted white shell and supported by a chrome and oak base. The La Chai...

A moulded plywood DCW dining chair or side chair designed by Charles and Ray Eames and produced by Herman Miller, USA, 1960s. 16.6” seat height

This is a DCW Dining Side Chair, initially designed by Ray and Charles Eames in 1946. This particular chair was manufactured ca. 1952 in the United States by Herman Miller. The desi...

A classic dining chair with arms on a swivel dowel base, second edition, ca' 1950's. Salmon color with birch legs, beautiful patina.

An early production "Contour" Rocker / Rocking Chaise, designed by architect Frank Gehry. Produced by Easy Edges, Inc, United States / Canada, 1970s. Produced in corrugated cardboard...

Classic, elegant, with a perfectly imperfect touch. On their own they make a statement with their gentle flared bottoms and deep fluting. Hang in multiples for extra oomph. These cas...

A Pacific walnut side table, the square top with rounded corners and a reeded edge above a similar under tier, on bobbin turned legs. Dimensions: 26" W x 26" D x 28.5" H.  

A classic and happy, Alexander Girard sceenprint on canvas panel ca' 1970's. Measures approx. 24"x24", mounted on stretcher.

The rarest of the rare, an exceptional, meticulously restored set of ten (10) cane back Klismos dining chairs by Edward Wormley for Dunbar Furniture, circa 1948. The set consists of ...

Exceptional two piece sectional, having two curved sections, with an even arm and seat back. This sofa can be set up together, or each piece can be placed separately if that works be...

Stoneware planter by John Follis for Architectural Pottery. This example has a drum shape with a rounded lip that curves in at the top of the piece. Planter stamped "USA.” Dimension...

Percival Lafer “MP-41” armchairs for Lafer MP, wood and cognac leather, Brazil, 1972 The “MP-41” armchairs by Percival Lafer embrace fluidity with a structure that appears weightles...

Missing Back Cushion. Soiled Seat Cushion included. All original with original finish. The Frame is Excellent, Strong, Level and Sturdy. Original seat cushion a bit dingy. Imported ...

A pair of wrought iron lounge chairs by designer Mario Papperzini for John Salterini. Manufactured circa 1950's. This line of furniture was named "Amalfi" after the Amalfi coast in...

Rare and authentic Utö library table designed by Axel Einar Hjorth, manufactured by Nordiska Kompaniet, Sweden, 1932. Wear consistent with age and use, including surface scratches, m...

A pair of mahogany and fabric slipper chairs, line "Taliesin", designed by Frank Lloyd Wright and produced by Heritage Henredon, United States, c. 1955. Wear consistent with age and...

Murano glass wall sconce made of a curved panel, slightly frosted with wavy pattern reflecting on both sides. In the center is a unlacquered brass stem giving the final touch to this...